• Vario Tacho Constamatic (VTC) full-wave electronics
• Thumbwheel for preselection of speed
• Die cast aluminum gear housing
• Optimal cooling by axial/radial fan
• Two-speed gear unit
• Powerful impact mechanism
• Robust Metabo Marathon motor
• Metabo S-automatic torque limiting clutch
• Metabo winding protection grid
• Clockwise and anticlockwise rotation
• Quick-action keyless chuck Futuro Plus
• Spindle with hexagon recess for screwdriver bits
• Ergonomic housing design for ideal handling
• Overload protection
• No-volt release switch
• Extra handle with drill depth-stop
• Auto-stop carbon brushes
• Brush wear indicator
To limit the sudden reverse torque that occurs, for example, if the drill bit jams or snags.
The Marathon motor’s special winding protection and epoxy resin powder coating on the field coil make it absolutely insensitive to the otherwise destructive effects of grinding dust. The Metabo winding protection grid offers additional protection against the abrasive effects of such dust and grit.
This makes for convenient tool change, e.g. using the Metabo quick-action keyless chuck. The mounted accessory can be changed without need of a spanner - on angle grinders and jig saws too.
Metabo electroc power tools with the word "Signal" in the type designation have atermperature sensor fitted within the motor windings. If the temperature of the windings should aprroach the maximum permissible value, a light signal flashes to give warning of impending overload.
Variospeed (V) electronics explained:
The tools speed is infinitely variable allowing you to select extremely low speeds or the maximum speed. The tools speed decreases as the load placed on it increases. The lower the selected speed, the sooner the machine will come to a stop.
Specifications-
Torque: 28Nm/10Nm
Drilling diameter in:
Concrete: 20mm
Steel: 16mm/8mm
• Softwood: 40mm/25mm
• No-load speed: 0 - 900/0 - 2,600/min
• Rated input power: 1,010W
Output power: 610W
Rated load speed: 900/2,600/min
Maximum impact rate: 50,000/min
Collar diameter: 43mm
Drilling spindle thread: 1/2" -20 UNF
Chuck capacity: 1 - 13mm
Drilling spindle with hexagon socket recess: 1/4" (6.35 mm)
Weigh(without mains cable): 2.4kg
Also Known as Order# 601008620